programming aps685 remotes

Home / the12volt's Install Bay / Car Security and Convenience / programming aps685 remotes (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

streetstyle

Member - Posts: 19

Joined: November 26, 2003

Location: United States

Posted: November 29, 2003 at 12:54 PM / IP Logged

I need to know how to program remotes to an audiovox aps-685.the unit is brand new but one of the remotes is not working, I have the instructions that come with the module but the way it is worded it sounds like they are talking about the 785, because they say the siren and led will sound and flash when the module learns the remote. i tried calling auidovox tech but i think they are closed for the holiday weekend. so basically right now im SOL

Back to Top

superchuckles

Copper - Posts: 89

Joined: December 29, 2003

Location: United States

Posted: January 12, 2004 at 11:20 AM / IP Logged

to program new transmitters:

turn key to on position.

flip falet switch on / off / on / off / on / off

LED will flash 1 time, and siren will chirp 1 time, indicating system ready to accept programming for new receiver channel 1

press button(s) and hold until siren emits a long chirp - this indicates this button has been stored.

if you have additional transmitters that need to be added, repeat the previous step until all have had channel 1 added.

when ready to program channel two, flip the valet switch on and off

the led will flash two times, and siren will chirp twice indicating system ready to accept programming for new reciever channel 2

etc etc - keep repeating this procedure until you have all channels added, depending on how many channels are available for your model. if you are only setting up for two or three buttons (however many) - flip valet on / off until a short, then a long chirp is heard from the siren. this will indicate that you have exited the new remote programming mode. you should alternately be able to just turn off the ignition when you've finished adding channels and that should save and exit - you should get the same short / long chirp to confirm - hope that helps.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

programming aps685 remotes

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.