building up strength fast?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / building up strength fast? (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: December 09, 2003 at 4:09 PM / IP Logged

Sounds like a good idea but i def dont have time

dream it, build it, fiberglass it

pjon

Member - Posts: 18

Joined: November 11, 2003

Location: United States

Posted: December 09, 2003 at 5:13 PM / IP Logged

yea, that sounds like alot of work for that

cmaroman95

Member - Posts: 22

Joined: September 27, 2003

Location: United States

Posted: January 09, 2004 at 6:21 PM / IP Logged

what you could do is go ahead and put the sub in and not crank it up all the way. then as you turn up the sub watch the box. if it starts to flex and move then you might want to think about adding the expander. and when i say flex i don't mean a little vibration i mean swelling to twice the origianal size.

"get in where you fit in"

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: January 10, 2004 at 4:32 PM / IP Logged

Tahnks for all the advice everyone but the box is done now. I didnt add any glass but when i drilled thru it for a wire to go into it it was 1/2 inch thick. I guess i was just paranoid.

dream it, build it, fiberglass it

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

building up strength fast?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.