95 Chevy pickup remote start

I have looked at several wire codes for the 95 full size and see disparities in the Ignition wires.  Can anyone tell me how many ignitions need to be powered up to not have problems?   Thank you , Boomer

Chevy fullsize pickup should have 2 ignition wire. The second Ignition wire control the fuel pump wire. Most database said "Pink/White" but some will said "White". Both of them are correct. I done so many Chevy pickup on 95 models. Some have Pink/White on the Ignition Switch and Some have White on the Ignition Switch. Hopefully, this will help and good luck. Chevrolet Pickup - Fullsize 1995-1995 Remote Starter Wiring Colors and Notes Function   Vehicle Color Location Start:   YELLOW    IGNITION SWITCH HARNESS * Ignition #1:   PINK    IGNITION SWITCH HARNESS Ignition #2:   PINK/WHITE    IGNITION SWITCH HARNESS Ignition #3: Accessory:   ORANGE    IGNITION SWITCH HARNESS Brake Light:   WHITE (+)    AT SWITCH ABOVE BRAKE PEDAL Tach Signal:   WHITE OR WHITE/ PURPLE    AT IGNITION COIL Parking Lights:   BROWN (+)    AT HEADLIGHT SWITCH Headlights:   YELLOW (+)    AT HEADLIGHT SWITCH OEM Alarm Disarm:   N/A OEM Alarm Arm:   N/A Diesel Glow Plug: Clutch Bypass Wire: Notes:   * See Note #300 - General Motors Rear Wheel Drive Vehicles.

10nesne1 Thank you for your reply I appreciate you taking the time.  The diagram here https://www.the12volt.com/installbay/detail.asp?info=alarm&year=1995-97&make=Chevrolet&model=C/K%20Pickup&ID=17377&type=Alarm                shows three ignitions pink , white, and brown. Im not sure if I need to do the brown or not?   Its a 95 3/4 ton if that matters.   Thanks again.