2001 Toyota Sequoia alarm info

Home / the12volt's Install Bay / Car Security and Convenience / 2001 Toyota Sequoia alarm info (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

brianh

Silver - Posts: 516

Joined: August 25, 2002

Location: United States

Posted: December 09, 2003 at 5:11 PM / IP Logged

I am planing to install an alarm on this vehicle tommorrow. I have not done one of these and was wondering if anyone has any experience with this vehicle? I think that the door locks are the only tricky part of it(Muiltplex system) I know how to get around that. The ecu is in the driver door (right?) Any help that you could give me is much appreciated. Thanks in advance.

Brian

owner/installer

Sight & Sound Car Stereo

"all electronic equipment runs off of smoke, once you let it out, it stops working"

HamiltonAudio

Silver - Posts: 278

Joined: October 15, 2003

Posted: December 10, 2003 at 2:47 PM / IP Logged

Toyota

Sequoia

2001-2002

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	BLACK/ WHITE	IGNITION SWITCH HARNESS
Ignition #1:	BLACK/ RED	IGNITION SWITCH HARNESS*
Ignition #2:	BLACK / YELLOW	IGNITION SWITCH HARNESS
Ignition #3:	N/A
Accessory:	PINK	IGNITION SWITCH HARNESS
Brake Light:	GREEN / WHITE	AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:	YELLOW /GREEN	AT ECM PIN B4 **
Parking Lights:	GREEN (+)	AT JUNCTION BLOCK ON PASSENGER SIDE AT ECM
Headlights:
OEM Alarm Disarm:	RED / YELLOW (-)	INSIDE OF DRIVER'S DOOR
OEM Alarm Arm:
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	* This vehicle is equipped with a transponder immobilizer system. Use Universal Alarm Bypass Module part # 2x402 where X can be any number. ** ECM is located behind the glove box on passenger side of the vehicle.

Toyota

Sequoia

2001-2002

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	WHITE/ BLUE	IGNITION SWITCH HARNESS
Starter Kill:	BLACK/ WHITE	IGNITION SWITCH HARNESS
Ignition +12 Volts:	BLACK/ RED	IGNITION SWITCH HARNESS*
Dome Lights/Superv:	WHITE	AT BCM PIN B8***
OEM Horn:	WHITE/ RED (-)	DRIVER'S KICK PANEL
Power Lock:	SEE NOTE ****
Power Unlock:	SEE NOTE ****
Trunk Release:
Alarm Input Wire:	WHITE	AT BCM PIN B8***
Notes:	* The BCM is located high on the drive's side underneath the dash. Test for correct wire. ** See Installation Note #212 Modern Toyota Door Locks Diagram.

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: December 10, 2003 at 6:15 PM / IP Logged

theres an old thread about this model, search for "sequoia".......

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2001 Toyota Sequoia alarm info

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.