Immobilizer problem on 2000 Accord

I really need help with the 555H Immobilizer Bypass Module installation.  The Car is a 2000 Honda  Accord 6 Cyl.  A DEI  Viper 300 ESP was previously installed. I added the DEI 551T  Valet Remote Start.  The remote start works with the key in the ignition on the pre-installation test.  

I have the 555H hooked up as follows:

I cut the Red wire coming from ignition.

When trying to program the Immobilizer I get the light when starting with the key in the ignition.  It goes out just prior to starter kick in. showing that it learned.

No help profuse007.  I do have a Service Manual as stated above.  The wire colors do match the installation instructions.  The manual does state that the 555H is for Honda Accord 1999 to 2002, mine is a 2000 so I don't think that it is the wrong module.  I have tried manually grounding both the Blue/white(key sensing) and the Blue (remote start Input) both together and one at a time with the other connected as instructions call for.  I appreciate the input and I'm pretty sure it's got to be just one small mistake somewhere.  By the way I have soldered all connections as suggested in the installation instructions.  I guess it could just be a bad module but I think that that's even a more remote possibility.

I do appreciate ALL input.

Thanks jworm, I hope that blue wire connection is the problem.  Ill give it a shot and report back.

Thanks again...

OK, Thanks for all of the help.  Here is what I did:

I rewired the blue as JWorm said.  I then tried all 3 keys one at a time and still NO JOY.  So I thought just for the hell of it, maybe I can increase the transponder output from the keys by placing all 3 together, one in the ignition and on on either side of that.  SUCCESS, It learned and is now working great. 

Again, THANKS for all the help