tach wire 1991 Z34

Home / the12volt's Install Bay / Car Security and Convenience / tach wire 1991 Z34 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

micky

Member - Posts: 9

Joined: December 26, 2002

Location: United States

Posted: December 29, 2003 at 7:29 PM / IP Logged

have a 1991 z34 avital alarm and I am adding an avital q-start remote starter. Where can I find a tach wire that is live when the engine is running? I tried the white wire on the back on the actual tach but it is not powered when in remote start. Any ideas?

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: December 29, 2003 at 8:32 PM / IP Logged

The tach signal wire is either WHITE OR PURPLE / WHITE, which is located at the ignition module.

Regards

EVIL Teken . . .

HamiltonAudio

Silver - Posts: 278

Joined: October 15, 2003

Posted: January 01, 2004 at 8:55 PM / IP Logged

look for the FAT main wiring harness that runs on the right of the engine (when facing it from the front). peel away the large split-loom and you'll find the PURPLE / white tach you need in there.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

tach wire 1991 Z34

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.