2003 Ford F-150 alarm triggering

Home / the12volt's Install Bay / Car Security and Convenience / 2003 Ford F-150 alarm triggering (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

damangino

Member - Posts: 4

Joined: December 11, 2003

Location: United States

Posted: December 29, 2003 at 8:39 PM / IP Logged

Had a DEI Valet 554R recently installed in my 2003 Ford F-150. After arming the alarm, the alarm triggers after 5 to 10 minutes and the LCD remote shows a flashing door. Any clue as to what is causing this and how to fix it?

Any help would be greatly appreciated. I would take it back to the installer but, he's in Phoenix, AZ and I'm now in Tacoma,WA.

Thanks, Dave

Dave

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: December 29, 2003 at 9:32 PM / IP Logged

hi the gem module pulses the door every so often relay isolate and this will solve your problem pin 30 to one side of door trigger wire pin 87 to other side of door trigger wire pin 85 to door trigger on door side and pin 86 to 12v the trigger wire needs to be cut in half for this to work

good luck

kirk

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: December 29, 2003 at 11:04 PM / IP Logged

No way, some one in phoenix did that? That is one of the most common vehicles to put an alarm in here, they should have known about it. At any rate, if you can find out what wire/s that were tagged for the door trigger it could help.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

black2nd12

Member - Posts: 12

Joined: August 06, 2003

Location: United States

Posted: December 29, 2003 at 11:13 PM / IP Logged

you could also double isolate the door trigger with diodes.

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: December 30, 2003 at 2:47 AM / IP Logged

hi check it out and see what happens cut the door trigger to the alarm and see what happens if your poroblem goes away if it does relay isolate. we all have bad days with the brain on auto pilot installer could have forgot or new installer couldn't hurt to try see if it goes away

good luck

kirk

damangino

Member - Posts: 4

Joined: December 11, 2003

Location: United States

Posted: December 30, 2003 at 9:00 AM / IP Logged

Thanks for the help

Dave

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2003 Ford F-150 alarm triggering

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.