how to make perfect fibreglass circles?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / how to make perfect fibreglass circles? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

skyline_man

Member - Posts: 35

Joined: May 01, 2003

Location: Australia

Posted: January 15, 2004 at 8:55 AM / IP Logged

being trying to make door pods from fibreglass. I've got the basic shape, but the thing that i find hard is trying to make the hole for the speaker to sit on perfectly round. How do you guys do it?

xetmes

Silver - Posts: 586

Joined: May 18, 2003

Posted: January 15, 2004 at 9:24 AM / IP Logged

I usually use a small MDF ring cut with a router and glass to that, leaves a perfect round opening.

Gumbya4

Member - Posts: 12

Joined: January 15, 2004

Location: United States

Posted: January 15, 2004 at 2:47 PM / IP Logged

xetmes wrote:

I usually use a small MDF ring cut with a router and glass to that, leaves a perfect round opening.

Check this out.

http://web.njit.edu/%7Ecas1383/mdf%20rings/

„h "Simplicity is the ultimate sophistication." Leonardo da Vinci (1452-1519)

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how to make perfect fibreglass circles?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.