Command Start CS2400

Home / the12volt's Install Bay / General Discussion / Command Start CS2400 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

CLangan

Member - Posts: 8

Joined: November 03, 2003

Location: Canada

Posted: January 21, 2004 at 10:06 PM / IP Logged

Hello,

My command start failed and now flashes 9 times. I have seen that you just disconnect the battery terminal and this will clear the code.

This can't be the only way of clearing the code. Does anyone know if there is a way using the engine switch and the remote control. I have seen this done before but can't remember.

Thanks

Clinton

Back to Top

mikeshonda750

Copper - Posts: 105

Joined: December 03, 2003

Location: United States

Posted: January 23, 2004 at 8:44 PM / IP Logged

Command start? isnt that the type you can buy from AZ? Has the little valet toggle switch you mount under the dash and has a funky HUGE red LED on the side of the unit??? If i recall correctly, because I installed 2 of these... flipping the toggle switch on and off and pressing the button on the unit will do SOMETHING ~ Read your manual that came with it.. will detail how to do it. One thing i would question is ~ WHY is it going into service mode (or whatever it is doing) enough that you would need a quick way to get out of it?... just wondering is all

Back to Top

CLangan

Member - Posts: 8

Joined: November 03, 2003

Location: Canada

Posted: January 26, 2004 at 8:46 AM / IP Logged

Mike,

The manual DOESNOT have any reference to codes or how to clear them. As for my truck problem it has been a very cold winter (-45degc) which took longer to start and is causing the problem. I always have to pull the battery cable to fix it, but is a pain in the neck.

Clinton

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Command Start CS2400

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.