the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

1992 toyota camry alarm/locks


Post ReplyPost New Topic
< Prev Topic Next Topic >
junior22 
Member - Posts: 8
Member spacespace
Joined: January 04, 2003
Location: United States
Posted: January 21, 2004 at 11:37 PM / IP Logged  
i got everything in my alarm hooked up ..i gust cant figer out the power door lock wires ..the car comes with factory power door locks ..no transmitter ..but car has power door locks ..now can anyone please tell me how to find the rite wires ..now the car does have CHILD SAFETY
    ....thanks junior
mobiletoys2002 
Gold - Posts: 1,050
Gold spacespace
Joined: April 12, 2002
Location: United States
Posted: January 21, 2004 at 11:42 PM / IP Logged  
Your door lock wires are in the passenger kick panel in a blue plug ,blue/white is lock and lt GREEN/ red is unlock
These are negative pulse> TO test take a volt meter place the red probe on a known + voltage source now probe suspect wire with black probe press unlock swich and see if it pulses 12 volts. If it does that is your unlock wire do the same for lock. You may need to turn key in drivers door to get a reading check that to if no reading happens with the door switch.
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: January 22, 2004 at 12:06 AM / IP Logged  
i think the door locks is at the drivers kick i think its blue harness like mobiletoy mentioned. check out bulldogsecurity.com for specific info on the child safty wire.
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
mobiletoys2002 
Gold - Posts: 1,050
Gold spacespace
Joined: April 12, 2002
Location: United States
Posted: January 22, 2004 at 12:33 PM / IP Logged  
If you get it at the passenger kick child safety not required.
gbumbles 
Member - Posts: 6
Member spacespace
Joined: January 22, 2004
Location: Canada
Posted: January 23, 2004 at 12:08 AM / IP Logged  
doorlock wires are in the drivers k/p, blue connector, wires are either blue,blue/white or blue / YELLOW. neg. pulse, thin gauge wire. use a test light and probe wires, they should  lock and unlock. try to find the unlock wire that requires a double pulse. 
gdc

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, May 16, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer