the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

91 civic alarm wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
menappi 
Member - Posts: 25
Member spacespace
Joined: January 22, 2004
Posted: January 22, 2004 at 1:46 PM / IP Logged  

i just bought this alarm on ebay and want to install it, but i am confused. i thought it was going to be easy but this diagram they gave me sucks! anyways, i just want to know if anyoen can help me put teh wires where they are suppoesd to go. i dont really know any of them. here is a picture of the diagram they gave me. i have a 91 dx, no power windows or locks. i just want the alarm to function so if someone tries to break in it will siren, nothing special or remote start or ignition kill or any of that, just a simple alarm. someone pleas help me get this thing in.

91 civic alarm wiring -- posted image.

kenmci 
Copper - Posts: 161
Copper spacespace
Joined: July 15, 2003
Location: United States
Posted: January 22, 2004 at 1:59 PM / IP Logged  

You should be able to get the wiring color information off this website, using the vehicle information section, you can also get parking lights, accessory power and constant power using the male blade terminals on the fuse box (I believe) for this car.

menappi 
Member - Posts: 25
Member spacespace
Joined: January 22, 2004
Posted: January 22, 2004 at 2:48 PM / IP Logged  
whats a male blade terminal? yeah i checked and got the wiring info off the site, but im a little confused as to what some of the wires are in teh diagram, like dormer ??? i know what color and where the wires are in my car, but i dunno whiich ones to hook up to where. engine cap, side door (what if i want to hook up two doors), ignition coil? wtf? whats an overide button also?
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: January 22, 2004 at 4:05 PM / IP Logged  
Make:   Honda
Model: Civic
Year:    1988-91
This Database Was Last Updated On:    6/9/2003
Index #: 2418
Alarm
Constant 12 volts WHITE/ BLACK AND WHITE/ BLACK-IGNITION SWITCH HARNESS
Ignition 12 volts BLACK / YELLOW IGNITION SWITCH HARNESS
Starter BLACK/ WHITE IGNITION SWITCH HARNESS
Dome Light GREEN/ RED (-) WHITE CONNECTOR AT FUSE BOX
Trunk Pin Switch GREEN/ BLACK (-) AT REAR PIN SWITCH
Parking Lamp RED / GREEN (+) AT HEADLIGHT SWITCH
Power Lock GREEN / WHITE IN DRIVER DOOR #201
Power Unlock GREEN/ RED IN DRIVER DOOR #201
#201- See Negative Door Lock Diagram.
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
menappi 
Member - Posts: 25
Member spacespace
Joined: January 22, 2004
Posted: January 23, 2004 at 1:21 PM / IP Logged  
so am i supposed to just splice the wire and tap into it? or how do i hook the wires up???????? cut and connect?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, July 18, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer