Relay for keyless entry?

Home / the12volt's Install Bay / Car Security and Convenience / Relay for keyless entry? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

caraudio26

Member - Posts: 8

Joined: January 25, 2004

Posted: January 25, 2004 at 5:31 PM / IP Logged

I have a 97 Jeep Cherokee that i am installing a starter/alarm in. The alarm is a Delta Pro 5005. I got a printout of the wiring from my buddy at Best Buy and it says I must use relays to trigger the door locks. The Jeep has factory door locks on it, they are 3 wire negative. The alarm has 3 wires for door locks,

[green] lock output (-)500mA
[blue] unlock output (-)500mA
[red] +12V relay trigger output 100mA

Well my question is how would i hook this up and if a relay is needed, what one(model # or whatever), where would i get it and price estimate, and how would i go about hooking it up.

iskidoo

Silver - Posts: 1,040

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 08, 2002

Location: Maine, United States

Posted: January 25, 2004 at 5:51 PM / IP Logged

It's on this site under diagrams. Heres's a quick link to the page. Just use the 3 Wire Positive Door Locks

but change both normally open terminals (87) from 12V(+) to ground as it shows.

URL=https://www.the12volt.com/doorlocks/page3.asp#3wp]https://www.the12volt.com/doorlocks/page3.asp#3wp[/URL]

caraudio26

Member - Posts: 8

Joined: January 25, 2004

Posted: January 25, 2004 at 5:59 PM / IP Logged

Well whats the red +12V relay trigger output (100mA) for, thats one of the three wires on the harness coming from the alarm.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: January 25, 2004 at 9:36 PM / IP Logged

Power Lock PINK/VIOLET EITHER KICK #201

Power Unlock ORANGE / VIOLET PANEL

#201- See Negative Pulse Door Lock Diagram.

if your door lock outputs are neg. and the car has neg, have you tried to hook them up direct??

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

caraudio26

Member - Posts: 8

Joined: January 25, 2004

Posted: January 27, 2004 at 8:26 AM / IP Logged

i havent tried that yet because from what i was told, the factory door locks are high current so i would need a relay.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Relay for keyless entry?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.