2000 Malibu

Home / the12volt's Install Bay / Car Security and Convenience / 2000 Malibu (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Lmsc

Member - Posts: 13

Joined: January 17, 2004

Location: Canada

Posted: February 03, 2004 at 12:10 PM / IP Logged

I am installing a remote in this car . Have the passlock bypassed and using the following wires: Ign1 pink Ing 2 green acc orange The car will not start with the remote. Any help would be greatly app.

Larry

lmsc

Back to Top

Lmsc

Member - Posts: 13

Joined: January 17, 2004

Location: Canada

Posted: February 03, 2004 at 3:03 PM / IP Logged

I now have the remote starting the car, but when I turn the key on and take it off of remote the passlock light on, other then that it is fine. Any help will be appreciated.

Larry

lmsc

Back to Top

soultinter

Copper - Posts: 170

Joined: January 16, 2004

Location: United States

Posted: February 03, 2004 at 7:02 PM / IP Logged

your bypass needs to be fine tuned, sounds like you are at the outside edge of tolerance and need to get the resistance closer to tolerance.

Back to Top

mobiletoys2002

Gold - Posts: 1,050

Joined: April 12, 2002

Location: United States

Posted: February 03, 2004 at 7:05 PM / IP Logged

i did a malibu same thing happened with light i have had no problems in over a year!

Back to Top

Search for other posts by mobiletoys2002

Lmsc

Member - Posts: 13

Joined: January 17, 2004

Location: Canada

Posted: February 06, 2004 at 5:30 AM / IP Logged

I changed the resistor last night. Now it starts fine with the remote and then turn the key on the passlock light is on. If you shut the car off and restart it with the key the light is gone and all is well.

Appreciate the folks.

Larry

lmsc

Back to Top

jrilla

Gold - Posts: 1,498

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 19, 2002

Location: North Dakota, United States

Posted: February 06, 2004 at 8:34 AM / IP Logged

If you installed a anti-grind relay, then you need to turn the key to start before hitting the brake to turn off the RS. If you did not install an antigrind relay, you should to avoid grinding the starter everytime. I am pretty sure it does not have a factory anti-grind featrue, but I guess it could. There's one way to find out though.

J Rilla

Owner/Installer

Back to Top

Lmsc

Member - Posts: 13

Joined: January 17, 2004

Location: Canada

Posted: February 11, 2004 at 4:17 PM / IP Logged

I installed the anti-grind and everything is working ok. Thanks for all the help, it is good to know you have somewhere to go and get good info.

Thanks again. Larry

lmsc

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2000 Malibu

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.