tach source?

Home / the12volt's Install Bay / Car Security and Convenience / tach source? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

p01110101

Member - Posts: 43

Joined: January 12, 2004

Posted: February 07, 2004 at 5:30 AM / IP Logged

i need to find a tach source for a remote start unit? it is for a 1997 chrystler town and country minivan. Where would be a good place for a tach source and/or where would i find it?

Back to Top

bobrosco

Member - Posts: 10

Joined: February 01, 2004

Posted: February 07, 2004 at 10:21 AM / IP Logged

Tach Signal:

GRAY & D BLUE/TAN

AT POWERTRAIN CONTROL MODULE (2.4L) *

* Each Wire Listed Above Is A 2 Cylinder Signal. 3.0L Tach Wire Is GRAY/RED At Powertrain Control Module (PCM). 3.3L & 3.8L Tach Wire Is GRAY/RED, DARK BLUE/TAN And RED / YELLOW At PCM (Each Wire Is A 2 Cylinder Signal).

Found it at http://www.designtech-intl.com/Content/techsupport/wirecolors/VehicleDetail?modelID=341

Though I don't know how a 2-cylinder tach signal is going to affect the install. Hope somebody else does.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

tach source?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.