need help interpreting this pic (relay d

Home / the12volt's Install Bay / Car Security and Convenience / need help interpreting this pic (relay d (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

95Legend

Member - Posts: 24

Joined: February 01, 2004

Location: United States

Posted: February 09, 2004 at 2:53 PM / IP Logged

need help interpreting this pic (relay d -- posted image.

bigger pic

Im confused as to where 87a and 30 go, both to ground????. Also im not sure what to hook 86 up to i think it says "Negitice input from remote strat, light flash, neg out when remote starts" but the first and the last things it mentions would be two different wires???? can someone help me out

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 09, 2004 at 3:36 PM / IP Logged

When adding a remote start interrupt the BLACK/ red wire in the drivers kick harness to the rear of the vehicle with the status output ( 2nd IGN or 3rd IGN output ) of the remote start. This will keep the steering wheel from moving into place until the key is in the ignition and the brake pedal is pressed.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

95Legend

Member - Posts: 24

Joined: February 01, 2004

Location: United States

Posted: February 09, 2004 at 5:54 PM / IP Logged

im not sure what you are telling me because once the car is started with the remote start(started without the key in ignition) the steering wheel memory is automatically erased. I need to add this relay to give the steering wheel power while it is being started so the memory is not erased.

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 11, 2004 at 3:09 PM / IP Logged

Send me the LARGER file to : velocity@valleycable.com and I will interpret it for you.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

need help interpreting this pic (relay d

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.