Alarm sensor

Home / the12volt's Install Bay / Car Security and Convenience / Alarm sensor (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

benokolo

Member - Posts: 1

Joined: April 08, 2002

Location: United States

Posted: April 08, 2002 at 12:16 AM / IP Logged

I have a 1996 Mazda 626 with an after mareket (BICRON) alarm systems, The Remote control is not able to activate or deactivate the alarm. When the botton on the remote control is pressed, the light on it flashes but no action is executed. the flashing red light on the dashboard is flashing randomly and there is a single tone that sounds constantly even when the car is running. The sound is like the one you hear when the key is left in the ignition or the light is left on. What seems to be the problem. Alarm sensor -- posted image. Could you help me?

benokolo@usa.net

90303

Back to Top

Thinkster

Copper - Posts: 94

Joined: March 27, 2002

Location: United States

Posted: April 08, 2002 at 1:51 AM / IP Logged

First, what does this have to do with "Alarm Sensor" ??

As far as the alarm goes, can you put the alarm into Valet mode? If so, does the LED stay solid lit? Regarding the tone, can you Disconnect the alarm and see if the tone goes away?

As far as the remote is concerned, it is possible for the LED to flash when pressing the button, but for the transmit to be not there or to be off Frequency. I've repaired hundreds of remotes and have commonly had to replace the tuning cap in them among other things.

Back to Top

Elizstoy

Member - Posts: 38

Joined: August 29, 2002

Location: California, United States

Posted: October 19, 2002 at 6:11 AM / IP Logged

Would you happen to have the wiring diagram for your BICRON alarm? Thanks

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Alarm sensor

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.