Integra Gauges

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Integra Gauges (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tonto26

Member - Posts: 41

Joined: July 23, 2002

Location: United States

Posted: February 16, 2004 at 10:45 PM / IP Logged

Anybody put glow guage faces in a 96 Integra AT? If so, do the needles have to be removed? Also, Which ones are best?

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: February 16, 2004 at 11:19 PM / IP Logged

I put them in my civic and the needles DO NOT get removed, they just slide over them. If you remove them they will not go back in. My Temp gauge hasn't worked since.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 16, 2004 at 11:40 PM / IP Logged

Remove the two screws that are holding down the existing gauge & slide the center of the new gauges over the end of the needle and slide it to the center of the pin. Becareful not to put too much pressure on the center of the neddle as this will break the needle off at the coil and will require you to replace that guage.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Integra Gauges

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.