RS/Alarm Install problem

Home / the12volt's Install Bay / Car Security and Convenience / RS/Alarm Install problem (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

birdslam

Member - Posts: 18

Joined: January 01, 2004

Location: United States

Posted: February 17, 2004 at 12:23 PM / IP Logged

I was looking too and I have the Green wire (-) Door trigger input zone 3, hooked up to the GMDL-BP. I wonder if it shouldn't be the Violet (+) Door trigger input zone 3. I will measure on the output of the GMDL-BP tonight and see what this does when the door is opened. Maybe it is a positive pulse and right now thinks the door is always open?? I don't believe that is the case otherwise I would think it would show a door trigger on the 2-way display which it isn't doing.

birdslam

Member - Posts: 18

Joined: January 01, 2004

Location: United States

Posted: February 17, 2004 at 8:11 PM / IP Logged

Well, I found out that the problem has to be the 2-way remote. I tried about everything possible as far as unhooking wires etc, then I decided to reprogram everything and while I had power unhooked to the remote start and the bypass module I noticed the damn icon was still on like it was triggered. So..... I took the battery out of the remote put it back on (with all power still removed from the vehicle and the icon was still stuck on. It appears that this thing is just bad from the factory and isn't reporting any triggers at all. I hooked up the siren to verify this as well. No siren, no triggers but the icon is stuck on.

Thanks to everyone that helped. Now hopefully I can get a replacement remote.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

RS/Alarm Install problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.