Tach Wire on a 98 Crown Vic

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Tach Wire on a 98 Crown Vic (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Duston

Member - Posts: 42

Joined: March 08, 2003

Location: Iowa, United States

Posted: February 17, 2004 at 12:07 PM / IP Logged

Looking for a tach wire on the 98 crown vic. remote start needs a tach input. Theres no spark plugs so i guess its all electronic ing. Thought about connecting to the number one plug? any ideas thanks

Factory security systems suck!

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: February 18, 2004 at 12:26 AM / IP Logged

*4 The PCM is located under the hood to the drivers side of the brake master cylinder.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Tach Wire on a 98 Crown Vic

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.