Pics of Cylindrical Sub Enclosures
Home /
the12volt's Install Bay /
Fiberglass, Fabrication, and Interiors / Pics of Cylindrical Sub Enclosures (
Topic Closed)
Topic Closed)
Members
Search
Register
Login
Posted: February 18, 2004 at 7:22 PM / IP Logged
Posted: February 20, 2004 at 10:45 PM / IP Logged
Posted: February 20, 2004 at 11:40 PM / IP Logged
using a 12" sub, and its most likely gonna be angled out of a piece in the back of the trunk like this:
gotta love ms paint, lol, any suggestions welcome.
Posted: February 20, 2004 at 11:51 PM / IP Logged
Posted: February 21, 2004 at 6:53 AM / IP Logged
These are cylindrical enclosures, however i dont suggest them. Here is the link if hte pic doesnt show.... http://www.members.aol.com:/tsl812/buckets
Posted: February 21, 2004 at 9:12 AM / IP Logged
Posted: February 21, 2004 at 11:30 AM / IP Logged
Sorry, you can NOT post a reply.
This topic is closed.
Printable version
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
| Search the12volt.com |
Follow the12volt.com 
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Saturday, May 4, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
