Shock Sensor

another question with the same alarm, startc2003 I have installed it just like the manual says to; but for some reason when you arm the alarm, and hit the glass it should give a warning chip; but instead it sounds almost as the whole alarm is going off, only it stops, starts, stops, starts.. But if you open the door it will go all the way through the different sirens. I think I either have a bad wire/connection; or bad shock sensor. (I have two of the same shock sensors, and they both do it so I don't think it is that, but could be).. Thanks

Check your connections throughout the car. I'm not real familiar with that alarm but if you have two shock sensors that you know are good, then you may have a bad output from the alarm. Also make sure you have a "warn away" feature on your alarm...If so make sure that it is programmed.