Gelcoat

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Gelcoat (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Michael1moreno

Member - Posts: 19

Joined: January 02, 2004

Location: United States

Posted: February 21, 2004 at 10:29 AM / IP Logged

hey I am out here in Sacramento CA. and wondering if anyone knows of any classes out here that teach basic gelcoat application. Got molding and glass down just want to expand.

Search for other posts by Michael1moreno

audiomechanic

Silver - Posts: 388

Joined: November 09, 2002

Location: United States

Posted: February 21, 2004 at 11:19 AM / IP Logged

if it is going to be used for finishing a dash or sub box, you would be better off with automotive base coat and clear coat.

if you are making molds for esay replication of a part, then let me know i can give you some pointers

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Gelcoat

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.