Remote start 98 pontiac sunfire

ok, can someone give me the CORRECT wiring for a 98 pontiac sunfire se 2.2l manual.....  The factory specs i recieved from the alarm company about my car are WRONG and i'm glad i know what a multimeter is before i started cutting....  All the info i got from u guys on the 555l is great  and thankx... now then ,on the ign... Yellow wire going to the ign...  it  grounds out when i put the clutch in....  nothing to do with turning the key.... The orange and pink wires both show 12v when i turn the key getting ready to start <before crank>  white wire has power when i turn key to the slot just before run. there are also 2 black ones which both show ground with or without key. that is on the bottom plug...

Orange,yellow,white,pink,blk,blk

now on the top plug there are 2 red, both are 12v all time. the black wire grounds out when key is in crank. the green wire is grounded when key is put into cylinder ( Ie: that annoying alarm) the Brown is accessory.

That's what i have found out personally . now if someone can let me know the rest i would be happy... in other words I need which is starter output,ign1 and ign 2. i would guess the starter is white, and the 2 igns are pink and orange... just not sure which is 1 and 2

i have the 55l connected except a few wires.... purple,blk/blue,blk/white

BLACK/ white  goes to my top black, the BLACK/ blue goes to my green pink goes to 1 of 2 ign wires    for the purple wire.... I have no wire on the remote start that is neg   i have 6 wires... 2-12v red , purple to starter output,yellow to ign 1 and pink to ign2, last is brown to acc...