Clifford Responder RSX 3.5 Questions

Home / the12volt's Install Bay / Car Security and Convenience / Clifford Responder RSX 3.5 Questions (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

bd3521

Member - Posts: 40

Joined: January 23, 2004

Posted: February 23, 2004 at 8:35 PM / IP Logged

I just got a sweet deal on a Clifford Matrix Responder RSX 3.5 (aka viper 791xv).

Everything looks good but just have a few questions...

Is it only supposed to include the 2way lcd transmitter, or is the one-way standard transmitter supposed to come with it as well?

What is the standard rocker switch (on/off) in the package for?

bd3521

Member - Posts: 40

Joined: January 23, 2004

Posted: February 23, 2004 at 8:46 PM / IP Logged

Forgot one more question.

What button(s) do you press to illuminate the LCD transmitter? I read that you can program it to illuminate when a page is received, but what if you just want to sporadically check it in poorly lite locations..

thanks

mobile1

Silver - Posts: 479

Joined: February 23, 2004

Location: United States

Posted: February 23, 2004 at 10:45 PM / IP Logged

That unit only comes with the two way trans. The rocker switch is actually the supposed to run in line with the neutral safety switch wire (aka BLACK/ white wire). in its off position you cannot remote start the vehicle, if its on you can.

To illuminate the transmitter you push and hold all four buttons until it beeps once. you then push the unlock button. if you want to put it in vibrate mode you hit the lock button. hope this helps

wblakes

Copper - Posts: 202

Joined: February 03, 2004

Location: United States

Posted: February 23, 2004 at 10:46 PM / IP Logged

it only comes with one 2 way remote.

the rocker switch is for the neutral safety switch.

if you want to illuminate the remote; hold all four buttons simultaneously until one long beep is heard then press the unlock button to turn illumination on/off.

bd3521

Member - Posts: 40

Joined: January 23, 2004

Posted: February 23, 2004 at 10:52 PM / IP Logged

Thank you very much!! I will probably have a few more questions when i actually install this bad boy.

thanks again

timsshadow

Member - Posts: 9

Joined: February 24, 2004

Location: United States

Posted: February 24, 2004 at 1:01 AM / IP Logged

Holding All Four Buttons Down Goes Into Your "Owner Programming" Mode. In There, you can turn your illumination on and off (the unlock button) and you can also turn your beep into a vibration by pushing the lock button. Just thought that might help you out.

To Get Someone's Attention, You Can't Merely Tap Them On The Shoulder, You Have To Hit Them With A Sledgehammer.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford Responder RSX 3.5 Questions

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.