the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Trunk Release


Post ReplyPost New Topic
< Prev Topic Next Topic >
asab16 
Member - Posts: 44
Member spacespace
Joined: February 12, 2004
Location: United States
Posted: February 24, 2004 at 11:16 PM / IP Logged  

Guys 95 Lesabre as  usual. Need some help. The Trunk release switch is hard to get @ any advice.(For RS. with trunk release.)

 I can touch the wires behind the switch  but its difficult to Tap since its so HIGH. So I attempted to get the wire @ the Glove BOX...there is a switch there 4 trunk release ON and OFF. Both these black wires are 12volts constant/ when I checked with my meter. I see two black wires behind the trunk release switch and 1 orange with black stripe wire and a Grey wire. I suppose the ORANGE / black and Grey is for the lumination of the trunk release switch. Anyway could somone tell me any other place where I can tap the wires for trunk release. If I have to do @ the switch will either of the 2 black wires work? and whats the relay setup.

THANKS

Oh and p.s <----please answer this one......I have keyless entery and trunk release on the buick........taping the wires for R.S-keyless wont hurt I hope?Trunk Release -- posted image.

BByinstaller 
Member - Posts: 10
Member spacespace
Joined: December 14, 2003
Location: United States
Posted: February 24, 2004 at 11:21 PM / IP Logged  
you can normally get the trunk, brake, parking light, and door trigger all in the driver side door runner on most older cars. i would try there
BByinstaller 
Member - Posts: 10
Member spacespace
Joined: December 14, 2003
Location: United States
Posted: February 24, 2004 at 11:23 PM / IP Logged  
my info says that its a + BLACK/ white wire in the drivers kick. so try there and the door runner
asab16 
Member - Posts: 44
Member spacespace
Joined: February 12, 2004
Location: United States
Posted: February 24, 2004 at 11:23 PM / IP Logged  

 Thanks u probably right.....there are actually 3 black wires in the door runner.....I wanna play safe. I want to keep the wiring stripping to a mInium.......ummm could u tell me another thing.....the relay setup on this

asab16 
Member - Posts: 44
Member spacespace
Joined: February 12, 2004
Location: United States
Posted: February 24, 2004 at 11:29 PM / IP Logged  
thanx 4 the reply.........Black with white stripe ??? In the drivers RUnner...???
BByinstaller 
Member - Posts: 10
Member spacespace
Joined: December 14, 2003
Location: United States
Posted: February 25, 2004 at 12:34 AM / IP Logged  

well im not sure what system you are putting in so im not sure what your trigger is but ill show you as if its a neg output from the RS

term 85 goes to neg out from RS

term 86 and 87 goes to constant +12
term 30 goes to the trunk pop

thats it


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 13, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer