the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Fm Modulated Cd Changer


Post ReplyPost New Topic
< Prev Topic Next Topic >
asab16 
Member - Posts: 44
Member spacespace
Joined: February 12, 2004
Location: United States
Posted: February 26, 2004 at 9:10 PM / IP Logged  

Guys could u explain in general the hook up on a FM modulated CD changer.......considering there are no speaker wires.

thankx

shredder130 
Member - Posts: 41
Member spacespace
Joined: February 13, 2004
Location: United States
Posted: February 26, 2004 at 9:33 PM / IP Logged  

basically it goes in between your headunit and your antenna, you un plug the antenna, pulg the antenna into the wire that comes out of the cd changer and plug the other wire that comes out of it into the head unit and hook up power gound n such, thats how my friend's sony was,hope i didn't confuse you

good luck

markcars 
Silver - Posts: 662
Silver spacespace
Joined: December 11, 2002
Location: New York, United States
Posted: February 27, 2004 at 2:34 PM / IP Logged  
thats right. no wires are required since everything goes via FM like your radio plays. the only wires are for power and antenna. the following is a general rule of thumb:
every gadget needs power (+ and -) (needs wires)
every gadget (except lightbulbs or simple motors) needs signals, either wired or wireless. in your case wireless signals (FM). (needs antenna)

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer