Hatch release on a 1998 Expedition

Home / the12volt's Install Bay / Car Security and Convenience / Hatch release on a 1998 Expedition (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

brianh

Silver - Posts: 516

Joined: August 25, 2002

Location: United States

Posted: February 28, 2004 at 5:33 PM / IP Logged

I was wondering if anyone had any diffrent info on this then I do. My program says a WHITE/ violet wire in a 20 pin harness in the driver kick. I found that wire but it seems awful small gauge. If anyone has any info I sure would appreciate it. Thanks in advance.

Brian

owner/installer

Sight & Sound Car Stereo

"all electronic equipment runs off of smoke, once you let it out, it stops working"

Back to Top

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: February 28, 2004 at 5:51 PM / IP Logged

I'm showing the same info as you..I didn't even think the older ones had a hatch release, but I guess I was wrong. Either way a thin white / violet (-) is the normal glass pop wire on the expeditions so test that one and if it tests correctly give it a shot should be good to go. On the newer ones up to 03 I pick it up as white / violet (-) in the passenger kick. '04 I use the thick white / pink (+) in the driver side rear door sill. The harness going under the seat. Good luck,

Mike

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 28, 2004 at 5:57 PM / IP Logged

Make sure you use a relay to activate the release.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

septicdeath

Copper - Posts: 60

Joined: February 13, 2004

Location: United States

Posted: February 29, 2004 at 11:00 AM / IP Logged

Hey, I'm installing a 4 window module into my 98 expedition, see some knowledge here.

I have the wire color scheme for the 4 windows "up" function. However, I dont have a understanding of where I might find a harness that has all the wires in one spot. (I dont want to run wires to each door boot) shouldn't it all be in a one spot somewhere? Also, can I send the "dome light (-) output) from the alarm to the wire utilizing pin 15 in the GEM Module C267 (15 is stated as Interior Lamp Relay Coil COntrol) I assume - to this wire will utilizing the built in relays..

Thanks

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Hatch release on a 1998 Expedition

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.