need info custom FG for PT Cruiser

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / need info custom FG for PT Cruiser (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

FredA1974

Copper - Posts: 31

Joined: July 04, 2003

Location: United States

Posted: March 01, 2004 at 12:25 AM / IP Logged

I would like to take the plastic cover on the rear hatch and custom do either 1 12" or 10" if hte 12 will not fit. I would also like to mount the amp in there as well. I was wondering how to start this out. I would like to keep the basic design of the factory plastic over. If anyone has or knows what the inside looks like you might be able to help me. I want the sub mounted on the pass. side and the amp on the driver side. I do now want it to go to far into the truck area. I have never worked with fiberglass before but been reading alot of the posts. I would need to know how to start it off and what I would need. I am going with an Alpine sub type R woofer and the F450 amp. Thanks for your help.

Also if there is any video's out there that I can see on the net about how this is done as well. (Fiberglassing that is) I would like to see how it is done as well as read these posts with pics.

Patpjrick

Member - Posts: 40

Joined: February 06, 2004

Location: North Carolina, United States

Posted: March 01, 2004 at 9:29 AM / IP Logged

http://www.selectproducts.com/frames.html

fazdaddy

Member - Posts: 4

Joined: January 31, 2004

Location: United States

Posted: March 03, 2004 at 12:19 AM / IP Logged

I have an article that outlines a full install similar to what you want to do. I can't remember where I found it, but if you want, I can email you the images, or you can email the guy who did the install. The article appeared in the July/Aug 2003 issue of "Auto Electronics." The installers name according to the article is Jeff Sit and his email is velocity@valleycable.com. Hope this helps.

FredA1974

Copper - Posts: 31

Joined: July 04, 2003

Location: United States

Posted: March 03, 2004 at 1:00 AM / IP Logged

Thanks for that info I will try to get in touch and hopefully come up with something.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

need info custom FG for PT Cruiser

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.