Denon car radio

Home / the12volt's Install Bay / Car Audio / Denon car radio (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

pgibson354

Member - Posts: 2

Joined: August 13, 2002

Location: United States

Posted: August 13, 2002 at 2:05 PM / IP Logged

Can anyone help me with a pin out on a Denon DRC-630 cassette deck? Don'T have original wire harness.

pgibson354

netscars

Member - Posts: 3

Joined: March 28, 2002

Location: Mexico

Posted: August 27, 2002 at 3:49 PM / IP Logged

Try the next:

Open the stereo case and look at the pin out in the print board (circuit board) in many cases the corresponding pin is printed with the respective output, or input (B+, ground, antenna, etc) and the speakers, this could be abreviated, i.e. left front speaker positive = fl+, or try to follow the printed circuits from the printed circuit to the pinout

just and idea, I'been does after and it works!

Nets' Car's

pgibson354

Member - Posts: 2

Joined: August 13, 2002

Location: United States

Posted: August 28, 2002 at 11:26 AM / IP Logged

unfortunatley I already looked and ther is nothing printed on the board. Thanks anyway

pgibson354

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Denon car radio

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.