single wire door lock/unlock

Home / the12volt's Install Bay / Car Security and Convenience / single wire door lock/unlock (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rookie_617

Member - Posts: 4

Joined: March 03, 2004

Location: United States

Posted: March 03, 2004 at 10:23 PM / IP Logged

Getting ready to insall viper 850xv on a 2003 neon. Has a single wire door lock/unlock. wondering if someone has installed or might know any info to help install.

anything would be extremely helpfull.

Thanks

rookie_617

Back to Top

devilsquid

Copper - Posts: 129

Joined: January 15, 2004

Location: United States

Posted: March 03, 2004 at 11:21 PM / IP Logged

what does, the alarm or the car?

Back to Top

rookie_617

Member - Posts: 4

Joined: March 03, 2004

Location: United States

Posted: March 05, 2004 at 12:13 AM / IP Logged

The neon has a single wire door lock/unlock. Not sure about the install of resistors or if there is another method.

Thanks

Back to Top

Toru

Copper - Posts: 102

Joined: January 24, 2004

Posted: March 05, 2004 at 12:31 AM / IP Logged

Power Lock: Lt.Green (-) Drivers kick panel door harness**

Power Unlock: Lt.Green (-)Drivers kick panel door harness**

Notes: **Lock requires a negative trigger through a 1k (1000) ohm resistor. Unlock requires a negative trigger through a 250 ohm resistor.

So both lock and unlock wires from the alarm connect to the same light green wire, each through a different resistor. The alarm needs to be setup for a negative pulse door lock system (see manual).

Back to Top

rookie_617

Member - Posts: 4

Joined: March 03, 2004

Location: United States

Posted: March 05, 2004 at 10:33 PM / IP Logged

Thanks for the help. I have done some wiring before but not with resistors and things. So my next question is how do you go about wiring in the resistors and are extra relays needed?

Thanks alot

rookie_617

Back to Top

rookie_617

Member - Posts: 4

Joined: March 03, 2004

Location: United States

Posted: March 05, 2004 at 10:38 PM / IP Logged

oh and also there are different wattage of resistors, whats

recommended for this install?

Thanks

rookie_617

Back to Top

Javelin3o4

Copper - Posts: 239

Joined: August 22, 2003

Location: United States

Posted: March 06, 2004 at 2:53 AM / IP Logged

most alarms like DEI ones that come with a 451m relay module include resistors and a paper showing their uses and values.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

single wire door lock/unlock

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.