I need a new amp!

Home / the12volt's Install Bay / Car Audio / I need a new amp! (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

Alpine Guy

Platinum - Posts: 2,478

This member has made a donation to the12volt.com. Click here for more info.

Joined: October 18, 2003

Location: Canada

Posted: March 07, 2004 at 10:08 PM / IP Logged

all subs will go down from 60 hz, since 60 hz is around the average resonance frequencie for vehicles, it seems loudest around that point. Under 60 hz your ears stop picking up the tones as the sub plays lower and lower.

Since your set on a ported box, maybe tune it different to handle the more power.

pioneer86

Member - Posts: 22

Joined: March 07, 2004

Location: United States

Posted: March 08, 2004 at 6:27 PM / IP Logged

Alright, I think I'm set. I will take my box apart, seal it (the port will still be there, but it won't be used), and run the Punch 501s amp to it. Hopefully, that will all work out perfectly and my two 10's will go down to the lower frequencies that I want. Thanks for your help everyone. I don't know how this'll work because the amp puts out 500w RMS, and my subs only handle 400w RMS....but I guess I just won't turn the gains up as loud. Thanks alot.

customsuburb

Gold - Posts: 1,813

Joined: January 17, 2004

Location: United States

Posted: March 08, 2004 at 7:37 PM / IP Logged

FYI: each sub will be getting 250 watts. This should not be over their RMS limit so set the gain properly and you should be set.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

I need a new amp!

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.