sub box help

Home / the12volt's Install Bay / Car Audio / sub box help (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

heschlie

Member - Posts: 24

Joined: March 06, 2004

Posted: March 08, 2004 at 10:31 PM / IP Logged

ok so i wanted to build a bandpass box for an audiobahn aw1200q but im still a newbie and i dont think i can handle it, so i plan to build a vented/ported type enlclosure, but i need to know when i calculate the port size with two 3" ports its something like 27", is that for each port or is it the length between the two ports, and would i get more bass if i used a larger port say 4", and lastly if anyone could direct me to a good box calculator i would be very happy. thanks.

jnrnavarro

Member - Posts: 5

Joined: March 07, 2004

Posted: March 08, 2004 at 10:41 PM / IP Logged

try the calculator on this site

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

sub box help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.