Installing Power Locks

Home / the12volt's Install Bay / Car Security and Convenience / Installing Power Locks (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Fender2martin

Member - Posts: 30

Joined: February 05, 2004

Location: United States

Posted: March 12, 2004 at 11:18 AM / IP Logged

I am currently driving a 1999 Dodge Dakot Sport reg cab. I want to put in Power Windows and Locks. However before i do so i need to tie up some loose ends with a few questions for you "pros" out there!!

1.) I am looking for a Power Lock Kit for 2 Doors and NOT Central Locking. I really want to have the switches. I'll tell ya why later in this post.

2.) I am also loking for a nice Power Window Kit for again 2 doors/windows with 3 switches. Two for my side to control both and one for the passenger to ctrl theirs.

Does anyone have any GOOD ercomendations for kits and where i can get them at the best price?? The reason i want the switches for the locks is that i am looking into getting ahold of the FACTORy switches from a salvage yard and want to figure a way to wire my kit to those OEM switches to keep the stock look. Firstly is this possible?

Thanks for ANY help you guys can offer! Thanks a ton!

Back to Top

tonto26

Member - Posts: 41

Joined: July 23, 2002

Location: United States

Posted: March 12, 2004 at 11:52 AM / IP Logged

In my opinion The best way to do it is to find a junkyard car, and strip it of it's doors. Then just swap the guts, and run wires. If you can find one with the same door panels as yours, you'll have factory switches in the right places. Buy the electrical manual for your vehicle, so you know where to connect up the wires without removing the junk cars main harness.

Back to Top

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 12, 2004 at 6:23 PM / IP Logged

SPAL has a good aftermarket power window kit....pick out the switch kit that you like and your off and running....you can still go with the CDL dook lock and use the switch setup.........SPAL also has the door lock kits......you can still use the factory switches with the aftermarkiet parts

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Installing Power Locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.