Battery Drain from LED’s, Scanner

Home / the12volt's Install Bay / Car Security and Convenience / Battery Drain from LED’s, Scanner (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

xetmes

Silver - Posts: 586

Joined: May 18, 2003

Posted: March 16, 2004 at 5:11 PM / IP Logged

ohh opps didnt see the part about the alternating... So I would say a 555 is the way to go as well, you could use a microcontroller.. haha Im so lazy I woud rather just write code than build the astable 555

its_radio_shop

Copper - Posts: 76

Joined: March 16, 2004

Location: United States

Posted: March 16, 2004 at 10:01 PM / IP Logged

Thought I would follow up with an inexpensive little kit I found in case someone is looking to do the same thing. This kit can be powered by 12V and instead of soldering the LED's to the board, just use a pair of wire to mount the individual LED's wherever you want.

Scroll down to kit K138, the pdf link will show picture and specs. For $3.75 its pretty reasonable.

http://www.a1parts.com/newkits/#top

Search for other posts by its_radio_shop

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Battery Drain from LED’s, Scanner

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.