Alarm goes off when nothing happens?

Home / the12volt's Install Bay / Car Security and Convenience / Alarm goes off when nothing happens? (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

scott565

Member - Posts: 19

Joined: March 18, 2004

Location: United States

Posted: March 19, 2004 at 11:15 AM / IP Logged

im a bit worried about using the dome light! what happens if I turn the dome light on with the button or swtich?

scott565

Member - Posts: 19

Joined: March 18, 2004

Location: United States

Posted: March 19, 2004 at 11:26 AM / IP Logged

well I was looking at http://bulldogsecurity.com/New%20Wires/New%20Wires/Wires/cav96-98.htm and it says that the dome light is LT GRN/ blk (-)

so how would I go about wiring it?

also its says taht it is at the ccm? where is that and what is that?

I feel like such a retard, all you guys are probably like WOW hes stupid..hahah

electricity isnt my thing

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: March 19, 2004 at 12:49 PM / IP Logged

nothing happens if you turn on your dome light. The alarm would not be activated if you are in the vehicle, and it works as an input trigger to set the alarm off. Some alarms with domelight supervision will turn on your domelight once the alarm is deactivated, but this shuts off as soon as you turn your ignition on. No need to worry.

Do it right the first time

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: March 19, 2004 at 12:55 PM / IP Logged

You must splice the wire from your alarm into the lt grn/blk wire. Make sure the wire from the alarm is also (-) polarity. The ccm is your central control module and it is located in your drivers' side kick panel.

Do it right the first time

scott565

Member - Posts: 19

Joined: March 18, 2004

Location: United States

Posted: March 19, 2004 at 7:53 PM / IP Logged

raydawg....(-) polarity as in?

anything thing is on my lsc remote there is a lil thing that shows up when the car is remote started or engine is running ( well I dont have the remote start hooked-up AN I never had the car running while armed ) but anyways when I arm it, this lil thing shows up meaning the car is running, so that is why the alarm is going off I think!

why would it be thinking that the car is running, when it really isnt?

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 19, 2004 at 8:58 PM / IP Logged

draasch wrote:

also, do you have a book that tells you what zone triggered the alarm....most owners manual will have a page in there about each zone....double check that info and see what it tells you..if you need one let us know, im sure we can find one for you...

were you able to find out this info????

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

scott565

Member - Posts: 19

Joined: March 18, 2004

Location: United States

Posted: March 19, 2004 at 9:17 PM / IP Logged

I did look threw my manual and found nothing. The only time it shows you what happened is when it was the shock sensor picks it up, but it doesnt do that. It keeps thinking that the car is being started or is started when in armed mode. and I dont know what

the alarm alarm name is condcordia auto www.concordia-auto.com

thanx again guys

Scott

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 19, 2004 at 9:27 PM / IP Logged

what is the model number????

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 19, 2004 at 9:29 PM / IP Logged

can you scan the install manual and send it to me???

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

scott565

Member - Posts: 19

Joined: March 18, 2004

Location: United States

Posted: March 19, 2004 at 10:02 PM / IP Logged

the whole thing or just the wiring diagram? I can take a pic of it.....thats the best I can do...no scanner :(

so if a pic is ok, let me know

thanx

scott

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.