bandpass

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / bandpass (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

Next Page > < Prev Topic Next Topic >

mstng5_0

Member - Posts: 4

Joined: July 18, 2003

Posted: March 21, 2004 at 3:26 AM / IP Logged

what is the thickness of the plexiglass used in a bandpass box. i wanna do a project sometime and try make a band pass box. thanks

Back to Top

xTimx

Copper - Posts: 354

Joined: September 13, 2002

Location: Canada

Posted: March 21, 2004 at 7:16 AM / IP Logged

1/4"-1/2" would work good. anything less would crack. just dont tighted the screws too tight when you install the plexiglass. you dont wanna crack it!

xTimx

Back to Top

shawn62

Copper - Posts: 63

Joined: December 03, 2003

Location: Canada

Posted: March 21, 2004 at 1:25 PM / IP Logged

I made a bandpass box for my sub and I used 1/4" it works fine if you want to see a pic then i will take one for you.

Back to Top

mstng5_0

Member - Posts: 4

Joined: July 18, 2003

Posted: March 21, 2004 at 8:14 PM / IP Logged

thanks man...hey shawn i wanna see a pic and see how it came out...thanks guys...

Back to Top

shawn62

Copper - Posts: 63

Joined: December 03, 2003

Location: Canada

Posted: March 21, 2004 at 8:16 PM / IP Logged

k I will post one tommorow

Back to Top

pureRF

Silver - Posts: 619

Joined: July 22, 2003

Location: United States

Posted: March 22, 2004 at 3:29 PM / IP Logged

you are aware of how much thick plexiglass costs right?

dream it, build it, fiberglass it

Back to Top

shawn62

Copper - Posts: 63

Joined: December 03, 2003

Location: Canada

Posted: March 22, 2004 at 7:08 PM / IP Logged

The plexie glass was not that expensive for me it cost me about $6 canadian for about 1 square foot and that was all I needed.

My digital cameras batteries are dead so Im going to get some tonight and I'll post a pic later tonight or if not tommorow.

Back to Top

shawn62

Copper - Posts: 63

Joined: December 03, 2003

Location: Canada

Posted: March 23, 2004 at 7:49 PM / IP Logged

here are some pics its got no fg on it and I havent carpted it it looks bad but sound great

Back to Top

shawn62

Copper - Posts: 63

Joined: December 03, 2003

Location: Canada

Posted: March 23, 2004 at 7:52 PM / IP Logged

Back to Top

mstng5_0

Member - Posts: 4

Joined: July 18, 2003

Posted: March 24, 2004 at 12:17 AM / IP Logged

pics arent loading...

Back to Top

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.