Amp turns on, and then off?

Home / the12volt's Install Bay / Car Audio / Amp turns on, and then off? (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: March 23, 2004 at 10:07 AM / IP Logged

Also check the load that you are running. The 351M can only handle a 2 ohm load. If you are connecting to two subwoofers, double check on your speaker wire and make sure you have the correct polarity going to the subwoofers.

Be careful whose advice you buy, but be patient with those who supply it. Amp turns on, and then off? - Page 2 -- posted image.

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: March 23, 2004 at 10:08 AM / IP Logged

If you are getting no sound from your Rockford, and if you connect another amp and you get a protection light, either your speaker load is way too low or your car is not producing enough voltage. What is your speaker setup?

superstreet786

Silver - Posts: 339

Joined: August 12, 2003

Location: United States

Posted: March 23, 2004 at 4:48 PM / IP Logged

Your speaker wires may be grounded

---- 1996 Chevy S10 ----

1 Lightning Audio S2.600.2 Amp

2 Lightning Audio 12" Subs

1 Lightning Audio 1 Farad Cap

Search for other posts by superstreet786

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Amp turns on, and then off?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.