1999 Town and Country, disarm wire?

Home / the12volt's Install Bay / Car Security and Convenience / 1999 Town and Country, disarm wire? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: March 23, 2004 at 10:54 AM / IP Logged

It's got a factory alarm that has to be bypass during remote start. What colour is the wire for the disarm? And where is it? Anyone with experience on this vechile can help me out is greatly appreciated. Thanks guy.

Be careful whose advice you buy, but be patient with those who supply it. 1999 Town and Country, disarm wire? - Last Post -- posted image.

ammarsunfire

Member - Posts: 41

Joined: September 01, 2003

Location: Canada

Posted: March 23, 2004 at 11:24 AM / IP Logged

The 12 volt vechile information says it white / dark green

(665 Ohm) left Connector bottom of Fuse Panel

thepencil

Gold - Posts: 1,526

Joined: December 16, 2002

Location: Canada

Posted: March 25, 2004 at 10:12 PM / IP Logged

What I am looking for is direct fax info., which I don't have. It said that to "DISARM NO UNLOCK|see directfax #1081". Can someone let me know what this information is. Further it said "*4 If the van has auto lamps, see direct fax document #1080." Im using the TechSoft vehicle database. What I am trying to do is to disarm the factory alarm for the remote start. Still need some help. Thanks.

Be careful whose advice you buy, but be patient with those who supply it. 1999 Town and Country, disarm wire? - Last Post -- posted image.

bmf1000d

Silver - Posts: 345

Joined: September 30, 2003

Location: United States

Posted: March 26, 2004 at 3:18 PM / IP Logged

OEM Alarm Disarm:		WHITE/ DRK GREEN (-)	BLACK # PIN CONNECTOR
OEM Alarm Arm:		WHITE/ DRK GREEN (-)	IN DRIVER'S KICK PANEL *****

***** Wire Located at BCM in Connector Closest to the Kick Panel; A Negative Pulse Through A 665 Ohm Resistor Disarm Alarm

"Big" Mike

Double Take

Fremont, Ne

remember to check all your wires with a dmm not a test light!!

i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

derek123

Copper - Posts: 163

Joined: October 09, 2003

Location: Canada

Posted: March 26, 2004 at 4:02 PM / IP Logged

could be WHITE/ red, same values and location....

665 - UL and disarm

4 K - L and arm.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1999 Town and Country, disarm wire?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.