Omega k-9 Mundial Alarm Problem

Home / the12volt's Install Bay / Car Security and Convenience / Omega k-9 Mundial Alarm Problem (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

Elliesguy

Member - Posts: 20

Joined: August 12, 2003

Location: United States

Posted: March 26, 2004 at 11:32 PM / IP Logged

I have a Omega k-9 Mundial Alarm/keyless entry, I also Have the databus module, Same as GmdL1

Anyways, if anyone out there knows this brand, i need your help.. I have everythign working except the unlock.. it is not working, if you need any info at all please ask, thanks for your time

eju

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 27, 2004 at 10:36 AM / IP Logged

What vehicle and YEar. I gasther it's a GM/Chevy/Pontiac of some sorts fromt he GMDL1 you have.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

Elliesguy

Member - Posts: 20

Joined: August 12, 2003

Location: United States

Posted: March 27, 2004 at 11:28 AM / IP Logged

2002 chevy trailblazer... o and i'm having trouble finding the parking light wire.. i've tested all the wires that were suppose to be it, but nothing seems to work. o and i cant seem to hook the dome light to come on when it unlocks.. thanks for your time

eju

tronx

Member - Posts: 13

Joined: March 16, 2004

Location: United States

Posted: March 27, 2004 at 5:41 PM / IP Logged

Elliesguy wrote:

You need to follow all the wires from behind the steering wheel to find the parking light wire.

Might even help if you take apart the front dash and look behind the light switches.

I'm not sure about the door & doom light. You might need a few relays?

You may need to program the Alarm option that turns on the doom light.

I'm not an expert in car alarms... Omega k-9 Mundial Alarm Problem -- posted image.

"Hacker of the booty"

jfk51502003

Copper - Posts: 221

Joined: March 04, 2004

Location: United States

Posted: March 27, 2004 at 5:45 PM / IP Logged

12volts	red (x2)	+	ignition harness
Starter	yellow	+	ignition harness
Second Starter	N/A
Ignition	pink	+	ignition harness
Second Ignition	white	+	ignition harness
Third Ignition	N/A
Accessory	orange	+	ignition harness
Second Accessory	brown	+	ignition harness
Keysense	lt. green	-	ignition harness
Power Lock	use Directed module #455G
Notes: If Directed module 455G is not available, refer to DirectFax document 1053.
Power Unlock	see power lock
Lock Motor	gray		driver door module in door
Unlock Motor	tan		driver door module in door
Parking Lights+	brown		driver kick panel
Parking Lights-	gray/black		headlight switch
Hazards
Turn Signal(L)
Turn Signal(R)
Reverse Light	lt. green	+	fuse box under rear seat
Door Trigger	gray/black	+	underdash light
Dome Supervision	comes on with disarm
Trunk/Hatch Pin	pink/black	-	liftgate module
Notes: The liftgate glass ajar switch wire is purple. It is also located at the liftgate module in the liftgate.
Hood Pin	pink/black	-	pin switch or BCM
Trunk/Hatch Release
Power Sliding Door	N/A
Factory Alarm Arm
Factory Alarm Disarm	lt. green	-	driver door module in door
Disarm No Unlock
Tachometer	white		blue plug, pin 49 @ PCM
Notes: The PCM (Powertrain Control Module) is on the driver side of the motor.
Wait to start
Brake Wire	white	+	brake pedal switch
Parking Brake
Horn Trigger	black or BLACK / YELLOW	-	steering column
Memory Seat 1
Memory Seat 2
Memory Seat 3

Omega k-9 Mundial Alarm Problem -- posted image.

Immobilizer Bypass Module:	Required: Yes	Type: Passlock 2	Part #: 555L or 555T
Notes: N/A

This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.

Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 27, 2004 at 8:24 PM / IP Logged

the dome light can be found at the bottom of the "B" post...i beleive its gray/blk....there are two wires at the headlight switch.....one will only work the inside dash lights and not the parking lights....i cant remember what color it is......you can test with your meter.....i used the DB-DLM-2 for the door locks and it worked perfect. it also has the wires for the factory arm/disarm........

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

FullForce

Copper - Posts: 103

Joined: April 09, 2002

Location: United States

Posted: March 27, 2004 at 9:39 PM / IP Logged

not sure about the K9 mundial but the K9 classic doesnt need relay for domelight supervision, as a matter of fact every Omega alarm I have installed has onboard relay for domelight

Elliesguy

Member - Posts: 20

Joined: August 12, 2003

Location: United States

Posted: March 28, 2004 at 12:09 PM / IP Logged

So what about the unlock part , in the manual it says if i have a 3 pin port on the alarm module, then i need to remove on of the wires and replace it with the one next to it. i only moved one pin over.. i didnt do the other saide. do you think that may have cauesded a problem.. cause when i hit the unlock on the remote , you can hear it click, but nothing happens......

eju

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 28, 2004 at 3:39 PM / IP Logged

the domelight feature wont work until you hook it up.

did you foind the parking light wire yet???

Make: Chevrolet

Model: Trailblazer

Year: 2002-03

Alarm

Constant 12 volts RED (2) IGNITION SWITCH HARNESS

Ignition 12 volts PINK IGNITION SWITCH HARNESS

Starter YELLOW IGNITION SWITCH HARNESS

Dome Light GRAY/BLACK (+) AT UNDERDASH LIGHT

Trunk Pin Switch PURPLE (-) AT BCM UNDER REAR SEAT *

Parking Lamp BROWN (+) DRIVERS KICK PANEL **

Power Lock GRAY SEE TECH NOTES ***

Power Unlock TAN FOR DOOR LOCK INFO

*Lift Gate:(-) PINK/BLACK At Lift Gate Module In The Lift Gate. ** Parking Light Wire Has Also Been Found As A BROWN / WHITE (+) High In Kick ***

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Elliesguy

Member - Posts: 20

Joined: August 12, 2003

Location: United States

Posted: March 28, 2004 at 9:26 PM / IP Logged

are there more then 1 brown wire in the bunch , cause i'ved tested that wire in the kick panel, and attached the headlight wire form the alarm , and nothign happens... .. thanks for everyone help.. this is driving me nuts, i did everythign that i was suppose to do .. but it doesnt work

eju

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.