Punch 40 amp

Home / the12volt's Install Bay / Car Audio / Punch 40 amp (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

erinh

Copper - Posts: 91

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 07, 2004

Posted: March 28, 2004 at 11:39 AM / IP Logged

In my first system in the mid 90s I had a Punch 40 amp pushing 2 Punch 12''s. Just out of curiosity, does anyone know how many watts those amps were? Its been so long I've forgotten. I remember they also made a Punch 200 and I think a Punch 150.

Back to Top

DYohn

Moderator - Posts: 10,741

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: March 28, 2004 at 4:49 PM / IP Logged

Great amp from the good old days when Rockford Fosgate was a top-5 performer in car audio. The Punch 40 was rated at 20 watts RMS X 2 into 4 ohms at 12 Volt nominal. But I've seen those amps bridged into 4 ohms pump out a measured 150 watts without breaking a sweat. Good stuff.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Punch 40 amp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.