Wiring Auto Start

Home / the12volt's Install Bay / General Discussion / Wiring Auto Start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

theecigarman

Member - Posts: 5

Joined: April 01, 2004

Location: United States

Posted: April 01, 2004 at 2:37 PM / IP Logged

I have a 98 ranger with fac door locks and have installed a "Bulldog" Auto start. I would like to use only one remote instead of two but don't know how to connect it so that the factory door locks work with the auto start. The auto start has only one button to start and one button to turn off. the fac. key fob only has lock and unlock and panic, am I sunk or is there a way to by pass a wire and make it work? Thanks for your help,

Geoff

Back to Top

cbag1

Copper - Posts: 59

Joined: February 26, 2004

Location: Canada

Posted: April 01, 2004 at 4:40 PM / IP Logged

If the model# is in this series RS82/RS85I follow this instruction carefully.

http://www.bulldogsecurity.com/bdnew/newsite/pictures/rs81new.pdf

goodluck.

Back to Top

theecigarman

Member - Posts: 5

Joined: April 01, 2004

Location: United States

Posted: April 01, 2004 at 4:50 PM / IP Logged

Cbag1, the unit is a rs79, do you think it will work with that one as well. I will try to do this this weekend. Let me know what you think.

Back to Top

cbag1

Copper - Posts: 59

Joined: February 26, 2004

Location: Canada

Posted: April 02, 2004 at 12:49 PM / IP Logged

The RS79/RS82/RS85I are thesame installation instruction.

Doorlock info:

POWER LOCK | pink / YELLOW | - | either door harness or *1

isolate this wire with diode which stripe face away your rs module.

Notes:

*1 These wires can also be found in the drivers kick panel in the large harness to the rear only if equipped with factory security.

goodluck.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Wiring Auto Start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.