Problem with Vacum system door locks

Home / the12volt's Install Bay / Car Security and Convenience / Problem with Vacum system door locks (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

JustDoIt2

Copper - Posts: 98

Joined: June 24, 2003

Location: Chile

Posted: April 04, 2004 at 10:36 AM / IP Logged

Hi, I have a prestige APS-786 and the plug for the door locks have three wires, ONe gree , one red and RED / black, I connected the way it says on this site with the relays, MY car is a mercedes 190e 1986 with vacuum system...........but i cant make it works..... Could anyone help me...

Back to Top

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: April 04, 2004 at 11:00 AM / IP Logged

Power Lock GREEN, BLUE OR YELLOW ALL THREE WIRES #210

Power Unlock VACUUM DOOR LOCKS PRESENT AT PUMP **

** This Car Uses A Vacuum System For Power Door Locks. Correct Door Lock Wire Will Switch Between Ground And 12V (+) Constant When Locking And Unlocking Doors.

look under the rear seat on the right side

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 04, 2004 at 11:15 AM / IP Logged

You have connected it exactly like this and set your alarm for a 2/3 second lock and unlock pulses?

Problem with Vacum system door locks -- posted image.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

JustDoIt2

Copper - Posts: 98

Joined: June 24, 2003

Location: Chile

Posted: April 04, 2004 at 12:05 PM / IP Logged

OK, I will try doing now... and i will post the results..

thank you

Back to Top

JustDoIt2

Copper - Posts: 98

Joined: June 24, 2003

Location: Chile

Posted: April 04, 2004 at 12:41 PM / IP Logged

OK, I did it but nothing happens, Look firs of all I dont feel any click on the relay when i press the lock buttom on the remote, and the is a wire that goes to the punp that need 12+ to lock and the same wire with ground will unlock .... But I dont know how to do it to make it work...

HELP ME>>>>

Back to Top

JustDoIt2

Copper - Posts: 98

Joined: June 24, 2003

Location: Chile

Posted: April 04, 2004 at 2:44 PM / IP Logged

OK, This was the problem, there was something wrong with the alarm because i have also the aps996 and i installed on my car and everything works fine... so im just going to leave that one..

thank you anyways

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Problem with Vacum system door locks

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.