97 Nissan Hardbody Pickup Alarm/Remote Start Wiring

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 97 Nissan Hardbody Pickup Alarm/Remote Start Wiring (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nismohrdbody

Member - Posts: 1

Joined: April 05, 2004

Location: United States

Posted: April 05, 2004 at 9:54 AM / IP Logged

sup yall, i am a newbie, i was woundering were i can get the wiring diagram for my 97 nissan hardbody pickup. thanks

Back to Top

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: April 05, 2004 at 11:01 PM / IP Logged

Nissan

Pickup

1996-1997

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	BLACK / YELLOW	IGNITION SWITCH HARNESS **
Ignition #1:	BLACK/ WHITE	IGNITION SWITCH HARNESS
Ignition #2:	N/A
Ignition #3:	N/A
Accessory:	BLACK/ BLUE	IGNITION SWITCH HARNESS
Brake Light:	GREEN/ YELLOW (+)	AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:	WHITE	PIN #3 AT ENGINE CONTROL MODULE *
Parking Lights:	PINK/BLUE (+)	AT HEALDIGHT SWITCH
Headlights:	RED / GREEN (DR) &	RED / BLACK (PS) (+) AT HEADLIGHT SW.
OEM Alarm Disarm:	N/A	IN SCHEMATICS
OEM Alarm Arm:	N/A	NO OEM ALARM PRESENT
Diesel Glow Plug:
Clutch Bypass Wire:
Notes:	* Engine Control Module Located Under Passenger Seat or at Ignitor in engine compartment. ** This Vehicle Is Equipped With Two Start Wires. Both Must Be Powered In Order For Vehicle To Start When Engine Is Cold; See Note #235 - Nissan Starter Wires Diagram.

Nissan

Pickup

1996-1997

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	WHITE/ BLACK	IGNITION SWITCH HARNESS
Starter Kill:	BLACK / YELLOW	IGNITION SWITCH HARNESS **
Ignition +12 Volts:	BLACK/ WHITE	IGNITION SWITCH HARNESS
Dome Lights/Superv:	RED / BLACK (-)	# PIN CONN. HIGH IN DR. KICK PANEL***
OEM Horn:	L GREEN/ BLACK (-)	STEERING COLUMN HARNESS
Power Lock:	BLACK/ RED	# PIN WHITE CONNECTOR
Power Unlock:	BLACK / YELLOW	HIGH IN DRIVER KICK PANEL ****
Trunk Release:	N/A
Alarm Input Wire:	RED / BLACK (-)	# PIN CONN. HIGH IN DR. KICK PANEL***
Notes:	* RED / BLACK (-) Wire Can Also Be Found At Any Pin Switch. ** See Note #201 - Negative Pulse Door Lock Diagram.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

97 Nissan Hardbody Pickup Alarm/Remote Start Wiring

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.