Adding power locks to a matrix

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Adding power locks to a matrix (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

sound decision

Member - Posts: 39

Joined: January 20, 2003

Location: Canada

Posted: April 06, 2004 at 3:36 PM / IP Logged

looking for ideas to add power locks to a toyota matrix. it has a cable system and it looks as though the plastic would break if you tryed to drill it out a bit bigger.

any ideas would be great..

thanks in advance

Back to Top

Search for other posts by sound decision

fredisfound

Copper - Posts: 60

Joined: June 17, 2002

Location: Australia

Posted: April 07, 2004 at 7:41 AM / IP Logged

not sure what a matrix is, but we get alot of probs with the 100 series cruiser over here.has cables for the central lock instead of rods. can be done with a fitting kit, but I dont do it,(it took a quallified auto electrician 2 days to fit it up.and it still had probs. the factory GXL has the central lock but fiting this system costs an arm and a leg and 3 balls.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Adding power locks to a matrix

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.