How to install amp?

Home / the12volt's Install Bay / Car Audio / How to install amp? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

Clean Install

Silver - Posts: 446

Joined: January 03, 2004

Location: United States

Posted: April 10, 2004 at 3:11 AM / IP Logged

well what I think the problem is, is that the fuse in which you have in, is too small the reason I say this is because if I am right that amp bridged will put out 800watts rms

and if you take that 800 divide by your vehicles voltage lets say 12.6 then your amp is pulling roughly 64amps so a 30 amp fuse is too small......

hope that helps

If we learn from each success and

each failure, then we can improve ourselves

Back to Top

BangBang

Silver - Posts: 287

Joined: October 25, 2003

Location: United States

Posted: April 10, 2004 at 9:45 AM / IP Logged

yeah it does. so wut i would need to do is take off the blade fuse 8 awg wire. and replace it with the agu fuse type that has the larger fuses that holds up to 60amps++++ ?

thanx

Back to Top

customsuburb

Gold - Posts: 1,813

Joined: January 17, 2004

Location: United States

Posted: April 10, 2004 at 10:07 AM / IP Logged

You need a kit like this.

Back to Top

BangBang

Silver - Posts: 287

Joined: October 25, 2003

Location: United States

Posted: April 10, 2004 at 1:38 PM / IP Logged

yeah i got that. but the amp takes only 8guage?

cuz 4awg is to fat?

Back to Top

customsuburb

Gold - Posts: 1,813

Joined: January 17, 2004

Location: United States

Posted: April 10, 2004 at 4:44 PM / IP Logged

4 gauge power cable should fit in that amp (unless you just shove it in the opening). You are going to have to twist the 4 gauge power cable tightly until it will fit into the opening.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

How to install amp?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.