the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

04 Chevy Avalanche, Avantguard 5


Post ReplyPost New Topic
< Prev Topic Next Topic >
blacktrail 
Member - Posts: 3
Member spacespace
Joined: April 12, 2004
Location: United States
Posted: April 12, 2004 at 4:37 PM / IP Logged  

I have an Clifford Avatguard 5 and when I disarm the system ( 3 of 5x) it will dis arm all the doors(I have the veh set to disarm driver's door only). Veh is Chevy Avalanche 04 z71. The installer has changed out the bypass but still have same problem..can anyone help????

kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: April 12, 2004 at 5:13 PM / IP Logged  
what databus module did you use?   not passlock...DATABUS
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
blacktrail 
Member - Posts: 3
Member spacespace
Joined: April 12, 2004
Location: United States
Posted: April 13, 2004 at 2:09 PM / IP Logged  
The databus was a 456g, DEI...and buypass 555l
mark mcj 
Member - Posts: 19
Member spacespace
Joined: April 13, 2004
Posted: April 13, 2004 at 8:18 PM / IP Logged  
depending on how the 456g is wired, it will unlock all doors or if wired differently, it will unlock with drivers door priority.  the wiring diagram should show how to unlock drivers first then with a second pulse it will unlock all. the ignition bypass will not hace any bearing regarding the lock / unlock funtion. good luck
mark mcj
kgerry 
Platinum - Posts: 3,455
Platinum spaceThis member consistently provides reliable informationspace
Joined: February 07, 2004
Location: Saskatchewan, Canada
Posted: April 13, 2004 at 8:25 PM / IP Logged  
tough to say...i've used the 456 half a dozen times with no problems at all...but the 455 for the ST6's ( Trailblazer, Envoy, Bravada ) does this often with no explanation.... just make sure that it is wired for either keyless or non-keyless depending on what the vehicle was....
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer
Owner/Installer
Classic Car Audio
since 1979
blacktrail 
Member - Posts: 3
Member spacespace
Joined: April 12, 2004
Location: United States
Posted: April 14, 2004 at 12:22 PM / IP Logged  
Thanks for the reply..will go over wiring one more time

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, May 12, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer