Kenwood amp doesnt work?

Home / the12volt's Install Bay / Car Audio / Kenwood amp doesnt work? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Mrhunter

Copper - Posts: 86

Joined: December 22, 2003

Location: United States

Posted: April 13, 2004 at 12:57 PM / IP Logged

I have a Kenwood amp and only the back outputs seem to work. Any ideas on what to check for and if possibly to repair? Everything else seems to work fine.

DYohn

Moderator - Posts: 10,741

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: April 22, 2003

Location: Arizona, United States

Posted: April 13, 2004 at 3:35 PM / IP Logged

Just to be sure it's the amp and not the input, try swapping the RCAs to verify. If the same channels stay "dead" with a known good input you can also try swapping speaker connections to rule out bad speakers. If it still points to the amp, does it have one fuse or two? If two, make sure one of them is not blown. If the inputs are OK, the speakers are OK, and there is no blown fuse, then it is likely the amp itself is gone. It could possibly be repaired by an authorized service center, but it may cost more than the amp is worth. Good luck!

Support the12volt.com

Mrhunter

Copper - Posts: 86

Joined: December 22, 2003

Location: United States

Posted: April 13, 2004 at 3:38 PM / IP Logged

Yeah Ive looked into those other sources. I guess I will have to junk it.

DYohn

Moderator - Posts: 10,741

Joined: April 22, 2003

Location: Arizona, United States

Posted: April 13, 2004 at 3:51 PM / IP Logged

It might be worth having it looked at and get a repair estimate before you junk it.

Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Kenwood amp doesnt work?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.