Generic Backup Siren how to install?

Home / the12volt's Install Bay / Car Security and Convenience / Generic Backup Siren how to install? (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

Pooreclipse

Copper - Posts: 75

Joined: April 14, 2004

Posted: April 15, 2004 at 9:50 PM / IP Logged

I bought a generic backup siren

It has a battery built in.

and 4 wires.

red + power

black - power

white + trigger

brown - trigger

So the red and black are probably constant 12V and ground, but what about the triggers? I have no idea how this is supposed to work. Came without instructions

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: April 15, 2004 at 9:52 PM / IP Logged

on the ones that i use, if you hook the + trigger up to the siren wire from the alarm, then you can use it as another siren or as your main siren. if the red or black is disconnected, then the siren will trigger.

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Generic Backup Siren how to install?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.