amp kits recommended

zup fam -

I need 2 amp kits!

(I'd like to go w/Lightning Audio or RF)

what amp kits should I use for this set-up:

(1) kicker 04kx1200.1 (pushing 2 S10L7's)

(1) kicker 04kx650.4 (pushing 4 kicker K60's)

Would like recommendation on a 1 farad power cap.

Also, those K60's came w/stock speaker wire, I plan to use a 12gauge braided wire for the subs, can I use the same for the K60's or use the stock cable they came with?)

thanks Fam -

engage -

bfog -

thay had 4 kits available - all 4gauge - !

here is a 8 guage, 4 channel:   http://www.knukonceptz.com/productDetail.cfm?prodID=KOLAK84

i wasn't thinking about what sizes are available, but no they don't have a 0/1 guage. sorry.

can you provide me with the models #'s I should use for the Lightning Audio kit and the Stinger cap - ?

that'll be cool - !

(the models of the amps are in above message)

thanks big time - !

ed

can you provide me with the model #'s for the Lightning Audio kits and the Stinger digital cap - ?

that'll be cool - !

thanks big time - !

ed

I power 2 amps from one amp kit. I used a 4  guage amp kit which runs into my distribution block, has 2 8 guage wires one for each amp. easiest and cheapest way to power 2 amps.  Im pushing Alpine MRP-M350(powers 2 JL w'0s in a bandpass) , and Alpine MRP-F240(powering JL 6.5" component Tr's , and JL 5.25 Tr's)

You wont need a capacitor after much consultation i found out they arent really useful for a small system, youd be better off to rebuild your alternator to push out 200 amps

might i also reccommend IXOS as thats the wiring i use and its great quality

http://www.ixos.co.uk/car/index.html

lighting audio and rockford are the same company so there wont be any difference in the kits other than the color of the wire