Component Speaker Wiring

Make & Model : MA Audio Synergy Series SY50C1....hope this helps out

Actually, this is not at all uncommon.  Your crossover is capable of a bi-amp application as shown in the schematic you posted.  Look in your packing for a jumper strap or wire that will combine the woofer and tweeter input positives and the woofer and tweeter input negatives.  If you don't have one, simply use a short length of speaker wire and run that from the inputs as I just referenced.  Run your front channel speaker lines from your amp/head unit to either the woofer or tweeter inputs (you just jumped them so now it won't matter which you connect to) and run your rear channel speaker lines to your 6x9's.  Finally, remember to use appropriate crimp or solder connectors and don't turn anything on until you've made all your connections.  I can't tell you how many times I've seen wires short out or an amp run with no load.  Neither one will prolong the life of your equipment...

This is indeed a case where biamplification is a possibility. It is not new or that uncommon actually. There should be enough info for you listed by those above to get you on the right track.Top Secret, I can tell you but then my wife will kill me.

just got the civic, speakers are in (bi-amp wiring)..sounds great  thanks for your help everybody